| Crushers |
| Description: GT440CC ENGINE – Cummins QSL9 380HP Tier IV 1800 RPM CONTROL SYSTEM – radio remote / tether IMPACTOR – 4240 horizontal shaft with heavy-duty solid rotor assembly, variable speed hydraulic crusher drive and 3 bar rotor with 3 reversible and replaceable blow bars, fully lined primary and secondary aprons, hydraulic adjustment of aprons and hydraulic actuated hood. (NOTE: Lower apron will be set at 1 1/2” and the upper apron will be set at 3” unless otherwise noted.) TRACK UNDERCARRIAGE – track width 400 mm (15.7”) FEEDER – 40” x 14’, grizzly fingers 1” nominal spacing, loading hopper with fixed walls, three way by-pass chute with flop gate and AR liner UNDER CRUSHER CONVEYOR – 900 mm (approx. 36”) hydraulic drive conveyor with 360 PIW, 2 ply endless belting; easily removed for maintenance VIBRATOR SCREEN – 5’ x 10’ Two Deck – 2 bearing with mounting, hydraulic drive and less screen cloth UNDER SCREEN CONVEYOR –1200 mm (approx. 48”) endless belt and drive CROSS OVER CONVEYOR – One (1) 600 mm (approx. 24”) with endless belt and drive RETURN CONVEYOR – 450 mm (approx. 18”) with endless belt, drive and 2 sided rock box hopper (lower for travel) DUST SUPPRESSION SYSTEM with manifold for customer water source HYDRAULICS – includes hydrostatic pump group and circuit, one (1) 12 GPM auxiliary circuit for side delivery conveyor (less side delivery conveyor), one (1) 20 GPM auxiliary circuit, and hydraulics for magnet (less magnet) PAINT - Two part urethane primer, two part urethane topcoat – Factory standard color(s). Options: Additional Cross Over Conveyor – 18” with belt and drive Magnet: Permanent cross belt magnet Grizzly Bars with 2 1/2” spacing vs. grizzly fingers Return Chute with flop gate and extension |